[診斷] 是燒錄機問題還是軟體問題?(還是人的問題-_-?)
各位大大~
我才燒完一片且一切都正常,
沒想到開始燒下一片就一直出現問題...
接著就一直在製造飛盤了!!
不知道"無效的區塊位址"到底是什麼問題?
再把光碟放回去都有顯示我燒進去的東西,
只是都打不開檔案 (所以有等於沒有...)
想麻煩各位高手幫我看一下這錯誤訊息到底在說什麼呀~~~~~
謝謝謝謝謝!!!!
1.燒錄機種(請PO型號)：
ASUS DRW-1608P2
2.使用空片(請用CD/DVD SPEED來PO出光碟資訊)：
16X DVD-R片
3.燒錄速度：
6X
4.使用軟體(註明版本)：
Nero 7.0.1.2
5.錯誤訊息或症狀詳述(可以的話請附上詳細過程)：
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/11/2 下午 12:54:32
NT-SPTI used
Nero Version: 7.0.1.2Internal Version: 7, 0, 1, 2 (Nero Express)
Recorder: <ASUS DRW-1608P2> Version: 1.17 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PCI PL-25U2S >Version: 2.00 - HA 1 TA 3 - 7.0.1.2
Adapter driver: <USB> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : ASUS DRW-1608P2 nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD6400AAKS-00A7B2 nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : ST3160812AS nvatabus Port 2 ID 2 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
ASUS DRW-1608P2 D: CDRom0
PCI PL-25U2S I: CDRom3
AXV CD/DVD-ROM J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 256MB (262272kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.12.2009
ISO 編製
上午 01:32:16 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
上午 01:32:17 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
上午 01:32:17 #3 Text 0 File Reader.cpp, Line 124
Reader running
上午 01:32:17 #4 Text 0 File Writer.cpp, Line 113
Writer D: ASUS DRW-1608P2 running
上午 01:32:17 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
上午 01:33:36 #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
上午 01:33:37 #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1769855 (393:18.05, 3456MB)
上午 01:33:37 #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
上午 01:33:37 #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: ASUS DRW-1608P2, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
上午 01:33:37 #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
上午 01:33:37 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1769856 (1769856) = #1769856/393:18.6
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1769856 blocks [D: ASUS DRW-1608P2]
--------------------------------------------------------------
上午 01:33:37 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: ASUS DRW-1608P2] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3624665088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1769856 | lead-out | 1 | 0x41 | 0x00
上午 01:33:37 #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
上午 01:33:37 #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
上午 01:33:37 #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
上午 01:33:37 #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
上午 01:33:37 #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
上午 01:33:38 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
上午 01:33:38 #19 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
上午 01:33:38 #20 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
上午 01:33:38 #21 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
上午 01:33:38 #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
上午 01:33:40 #23 Text 0 File Cdrdrv.cpp, Line 1197
01:33:40.437 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #24 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.671 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #25 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.687 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #26 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.687 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #27 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.703 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #28 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.734 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #29 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.750 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #30 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.750 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #31 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.781 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #32 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.796 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #33 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.796 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #34 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.812 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #35 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.843 - D: ASUS DRW-1608P2 : Queue again later
上午 01:33:54 #36 Text 0 File Cdrdrv.cpp, Line 1197
01:33:54.984 - D: ASUS DRW-1608P2 : Queue again later
上午 01:34:04 #37 SPTI -1064 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 08 80 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02
Buffer x0df60000: Len x10000
0x21 70 55 D5 B9 56 53 D4 1A D6 56 71 70 46 9C D6
0x92 E5 E8 7E 7D FC 73 F8 7A 7E 06 7C 6B 2F A7 2B
0x7F C2 3B AD 13 73 6C 80 7C 88 18 FC EA 09 EE A4
上午 01:34:04 #38 CDR -1064 File Writer.cpp, Line 302
Invalid block address
D: ASUS DRW-1608P2
上午 01:34:04 #39 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
上午 01:34:05 #40 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
上午 01:34:05 #41 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2175
上午 01:34:05 #42 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out
上午 01:41:52 #43 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8,310 KB/s)
如有好消息我會再來報告滴~
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 122.124.97.228
推
12/10 19:53, , 1F
12/10 19:53, 1F
→
12/12 17:17, , 2F
12/12 17:17, 2F