[診斷] 燒錄一直失敗
進版置底有教學 如何查到下列資訊 請先看!
1.燒錄機種(請PO型號):
http://www.wretch.cc/album/show.php?i=Zavior&b=20&f=1160303710&p=0
2.使用空片(請用CD/DVD SPEED來PO出光碟資訊):
http://www.wretch.cc/album/show.php?i=Zavior&b=20&f=1160303708&p=1
3.燒錄速度:
在跑燒錄速度時 出現錯誤訊息
http://www.wretch.cc/album/show.php?i=Zavior&b=20&f=1160303711&p=2
http://www.wretch.cc/album/show.php?i=Zavior&b=20&f=1160303712&p=3
4.使用軟體(註明版本):
http://www.wretch.cc/album/show.php?i=Zavior&b=20&f=1160303713&p=4
5.錯誤訊息或症狀詳述(可以的話請附上詳細過程):
我有蠻久一陣子沒有燒錄資料了(半年前還是可以使用的)
這陣子想把歌曲跟電影燒起來時卻發現燒錄一直失敗
連續失敗了5次以上 每次情況都是一樣
當我挑選好資料 按開始燒錄 並選擇低倍數之後 跑不到5% 就出現錯誤訊息
以下是燒錄失敗之後的LOG檔內容
1A23-0009-4130-2213-6402-6416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74,
size=164112 bytes, created 2004/10/26 下午 06:35:34
Nero Version: 6.6.0.15Internal Version: 6, 6, 0, 15e (Nero Express)
Recorder: <PIONEER DVD-RW DVR-212> Version: 1.21 - HA 2 TA 0 -
6.6.0.15
Adapter driver: <atapi> HA 2
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 6 TA 0 -
6.6.0.15
Adapter driver: <d347prt> HA 6
=== Scsi-Device-Map ===
DiskPeripheral : ST3250410AS atapi Port 1 ID 0
DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-212 atapi Port 2 ID 0
DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 6 ID 0
DMA: Off
CdRomPeripheral : SP4543Q PDE401U 2.0B ap09vlc7 Port 7 ID 0
DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-212 F: CDRom0
Generic DVD-ROM G: CDRom1
SP4543Q PDE401U H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1141MB (1168972kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.9.2009
ISO compilation
上午 05:21:04 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
上午 05:21:04 #2 Text 0 File Reader.cpp, Line 127
Reader running
上午 05:21:04 #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-212 running
上午 05:21:04 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
上午 05:21:04 #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
上午 05:21:04 #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1332591 (296:07.66, 2602MB)
上午 05:21:04 #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
上午 05:21:04 #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: PIONEER DVD-RW DVR-212, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
上午 05:21:04 #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
上午 05:21:04 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1332592 (1332592) = #1332592/296:7.67
relocatable, disc pos for caching/writing not required/ required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
1332592 blocks [PIONEER DVD-RW DVR-212]
--------------------------------------------------------------
上午 05:21:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-212] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
2729148416, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1332592 | lead-out | 1 | 0x41 | 0x00
上午 05:21:54 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
上午 05:21:55 #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
上午 05:21:55 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
上午 05:21:55 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
上午 05:21:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0
上午 05:21:55 #17 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
上午 05:21:55 #18 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Buffer underrun protection -> ON
上午 05:21:55 #19 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
上午 05:21:55 #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type:
recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920
MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
上午 05:22:47 #21 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x02F30000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02
上午 05:22:47 #22 CDR -1064 File Writer.cpp, Line 311
Invalid block address
上午 05:22:47 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
上午 05:22:48 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
上午 05:22:48 #25 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 831
上午 05:22:48 #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created
2007/3/8 上午 07:51:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 2007/3/8
上午 07:51:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512
bytes, created 2008/4/14 上午 02:40:30 (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes,
created 2004/8/22 下午 04:31:48 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0
(Security Option)
6.提供PC配備
MB(主機板型號廠牌):
POWER(廠牌瓦數):
作業系統(Linux, Windows, MacOS 版本):
電腦年齡(剛組好的電腦 或是用一陣子變這樣):
7.發問前做了多少功課.請先說清楚(參閱"[心得] 買來了燒錄機之後的二三事")
要人家幫你看電腦的問題 總是要表現一點誠意出來嘛
最好是再加一個:
(V)我發誓問題排除後會回版上回報 否則三天大便都不順暢
( )我不同意
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 114.45.176.166
推
09/08 07:58, , 1F
09/08 07:58, 1F
→
09/08 09:35, , 2F
09/08 09:35, 2F
→
09/08 09:36, , 3F
09/08 09:36, 3F
推
09/08 09:58, , 4F
09/08 09:58, 4F
推
09/08 09:58, , 5F
09/08 09:58, 5F
推
09/08 15:42, , 6F
09/08 15:42, 6F
→
09/08 20:23, , 7F
09/08 20:23, 7F
→
09/08 20:24, , 8F
09/08 20:24, 8F
→
09/08 20:24, , 9F
09/08 20:24, 9F
推
09/08 21:11, , 10F
09/08 21:11, 10F
→
09/08 23:25, , 11F
09/08 23:25, 11F