[問題] TP-Link WR841ND v8解磚求助

看板Broad_Band作者時間5年前 (2019/02/16 19:52), 編輯推噓8(8011)
留言19則, 5人參與, 5年前最新討論串1/1
小弟刷open-wrt到這台AP一半死機,就醒不過來,連不上wifi, 數據線插黃色孔接電腦也ping不到192.168.1.1 查了一下發現90%以上的人都是照著OpenWrt論壇上這段解磚,甚至依此發了不少影片 但是在用tftp回復韌體這段,我按著reset鍵,LED全閃到,只亮lock跟連接port的燈 甚至開著wireshark搜尋,我不管怎麼試都無法用tftp連接我的無線分享器,更別說把 韌體更新回去。 請問各位,我在流程上出了什麼問題,有解嗎? TFTP recovery via bootloader for v8,v9,v10,v11,v12 As most other current TP-Link routers this device can be flashed and debricked without serial access. Basically, the procedure is as follows: 1. Set your PC to use the static IP address 192.168.0.66 (the router will have 192.168.0.86) 2. Put an OpenWrt factory image named: for v8 mr3420v2_tp_recovery.bin or wr841nv8_tp_recovery.bin (for v8.4); for v9 wr841nv9_tp_recovery.bin; for v10 wr841nv10_tp_recovery.bin; for v11 and v12 wr841nv11_tp_recovery.bin in the root directory of an TFTP server and start it. For v12 you still need a v12 firmware. Just the filename has to be named as a v11 device! 3. Power on the router while pressing the reset button until the lock LED is lighting up 4. Wait for the router to reboot https://openwrt.org/toh/tp-link/tl-wr841nd#tftp_recovery_via_bootloader_for_v8_ v9_v10 謝謝!! -- ※ 發信站: 批踢踢實業坊(ptt.cc), 來自: 123.194.91.7 ※ 文章網址: https://www.ptt.cc/bbs/Broad_Band/M.1550317953.A.93B.html

02/16 20:13, 5年前 , 1F
電腦先設定 TFTP先開好 檔名要改對 照第三步驟開機
02/16 20:13, 1F

02/16 20:14, 5年前 , 2F
這樣應該會自己從TFTP載入檔案
02/16 20:14, 2F

02/16 20:14, 5年前 , 3F
這個前提是不能動到UBOOT
02/16 20:14, 3F

02/16 20:34, 5年前 , 4F
這兩個檔名mr3420v2_tp_recovery.bin/wr841nv8_tp_recover
02/16 20:34, 4F

02/16 20:35, 5年前 , 5F
.bin我同時都放了一個在資料夾 刷韌體會動到uboot嗎?
02/16 20:35, 5F

02/16 20:37, 5年前 , 6F
不是要直接插著電腦ㄇ
02/16 20:37, 6F

02/16 20:53, 5年前 , 7F
是阿
02/16 20:53, 7F

02/17 11:50, 5年前 , 8F
只放wr841nv8的韌體試試?但若是刷機過程當掉很可能就卡死
02/17 11:50, 8F

02/17 11:50, 5年前 , 9F
了。
02/17 11:50, 9F

02/17 12:02, 5年前 , 10F
沒用=.=
02/17 12:02, 10F

02/17 12:43, 5年前 , 11F
uboot刷掛了?只能拔flash或ttl線刷了。 不過機子舊了,對
02/17 12:43, 11F

02/17 12:43, 5年前 , 12F
岸近期很多礦難機,像新路由三之類的,有usb孔刷機更好玩
02/17 12:43, 12F

02/17 12:46, 5年前 , 13F
先用ping 192.168.0.86 -t 指令看開機後有沒回應吧。
02/17 12:46, 13F

02/17 12:47, 5年前 , 14F
若都沒反應就是刷死了
02/17 12:47, 14F

02/17 12:49, 5年前 , 15F
還有顯示燈號為何?像之前刷掛的是全部微亮 ping不通
02/17 12:49, 15F

02/17 12:52, 5年前 , 16F
電腦ip有改成192.168.0.66了嗎?
02/17 12:52, 16F

02/17 12:57, 5年前 , 17F
https://goo.gl/TGhDvw 有圖文的救磚很清楚
02/17 12:57, 17F

02/17 21:40, 5年前 , 18F
沒回應 燈號電源 LAN lock都會亮
02/17 21:40, 18F

03/10 19:02, 5年前 , 19F
這種通常電腦要改成特定IP,檔名要改對
03/10 19:02, 19F
文章代碼(AID): #1SP_c1ax (Broad_Band)